Same
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Same This was a try to simulate ray skin for the use on a handle, for Tsuka-Ito-wrapping. It's 30x260mm, wich is one…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Same
This was a try to simulate ray skin for the use on a handle, for Tsuka-Ito-wrapping.
It's 30x260mm, wich is one side of a Handle of a katana (in my case about 280mm).
Didn't start wrapping yet...^^
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.8
Infill:
-
Filament: Noyes PLA
Notes:
You shouldn't exceed 50mm/s speed and make sure your printer is leveled well!
Removing
Be careful getting the thin "skin" of your printer.
I suggest a thin, pointy tweezers.
How I Designed This
Design
Used an image of ray-skin and converted it into a .stl
Right settings took a while...
Category: Props