"Harbo Stegen" Art. nr. H-500-8, Stepladder Replacement Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement feet for stepladder model "Harbo Stegen Art. nr. H-500-8."
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Replacement feet for stepladder model "Harbo Stegen Art. nr. H-500-8."
Might work for other models of “Harbo Stegen” stepladders as well.
The company that sold the ladders went out of business in 2013, so spare parts might be hard to come by.
When you print the feet use a semi-flexible or flexible material. I used Ninjaflex TPU 95A, and it is perhaps a bit too soft.
I recommend you print it with the perimeter setting set high enough for the model to become massive. Or you can set the infill to 100%. I initially printed them with 2 and 4 perimeters and they collapsed under my weight. They were also unstable if you rocked the ladder side to side.
Turn off supports, they are designed into the model. I could remove them by hand after print was complete. Your mileage may vary.
I've included a couple pictures showcasing the design, print and testing process.