3018 CNC z axis upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an upgraded version of this: https://www.thingiverse.com/thing:3519669/files modified to make it easier to…
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 337
- Wydruki
- 0
- Wyświetlenia
- 2178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is an upgraded version of this:
https://www.thingiverse.com/thing:3519669/files
modified to make it easier to print , assemble and disassemble.
The z axis rods are mounted a little looser for easier assembly, but can be clamped in place with two M3x10 bolts and two M3 square nuts.
The bearings are a bit looser too. If they are too loose, wrap them in electrical tape.
The design has been modified to use an Openbuilds anti-backlash block instead of the regular leadscrew nut. A printable version of the block can be found here:
https://www.prusaprinters.org/prints/56496-openbuilds-anti-backlash-nut-block-printable-vers
Print instructions
0.4mm nozzle
0.2mm layer height
3 perimeters
supports off
Bigger nozzles could probably work too, but the holes would need to be drilled out.
https://github.com/katepavlu/3D-model-source/blob/main/3018%20CNC/Z%20axis%20upgrade/source.7z