Waldwerk Coffee Grinder (Kaffeemühle) Tightening Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool to hold the top nut of a Waldwerk Coffee Grinder, allowing you to tighten the shaft with a screw driver.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
If your Waldwerk Coffee Grinder is like mine, after about 100 coffees, the nut at the top came loose! Hand tightening it doesn't work, as it comes loose again after a few uses 😢 This tool slides into the top of the coffee grinder to hold the nut in a fixed position while you use any Hex Socket Screwdriver to rotate the shaft tight.
If you don't have a Hex Socket Screwdriver, you can use the grinder's hand-crank to tighten the shaft. This is not ideal, however, as there's only about 2mm of engagement between the crank and the shaft with the holder installed.
Note: Do * NOT * overtighten the nut/shaft. You are loading a radial bearing laterally, the more you tighten. Overtightening will damage the bearing, or could even tear it apart.