PCIe RJ45 Panel Mount Passthrough Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PCIe bracket for using an RJ45 Panel mount cable to pass ethernet into a computer case
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 169
- Wydruki
- 0
- Wyświetlenia
- 1403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This bracket is designed to be able to use an RJ45 panel mount extender cable to a PC tower. I needed a way to connect a device inside of my case to a network cable.
This is the panel mount cable I'm using but it might work with other models. https://www.amazon.com/dp/B07VDP9RFG
The cable came with M3 screws. I used slightly longer ones to make up for the added thickness I gave the bracket. The stock screws did look like they'd be fine but I wanted it to thread farther into the cable head.
Update v2: I removed the notch at the top of the bracket as it had potential to break off partially when screwed into a case. Now it should be sturdy. Left original model up too if someone prefers.
Update 03/29/2024: Added a version with two passthrough by request.