The100 printable printer power socket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a save power socket for the The100 fast printable printer.
- Ocena
- 4,5 / 5
- Polubienia
- 13
- Pobrania
- 52
- Wydruki
- 2
- Wyświetlenia
- 424
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Print it on its back and you only need supports for the bracket for two of the tree models.
Printer settings are the settings as used in the entire The100 project (see git of the project)
Use same heat inserts as the entire project attach the plug. (see BOM the100)
There are tree stl files:
- one that does not require any support. The socket sticks out
- one where the socket does not stick over the power supply, requires support for the bracket
- one where the front of the socket is in line with the back frame. Also needs support for the bracket.
The socket I used https://nl.aliexpress.com/item/4000829552351.html I am sure you can find similar sockets on Amazon
Inspired on https://www.printables.com/model/449442-plug-box-for-the-100 by @idconvict_610964
The printer: https://www.printables.com/model/430339-the-100-the-fastest-3d-printer-based-on-a-printed- great designed by @MattThePrinti_703024