Cat6 siding clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm running some Cat6 outside for a camera, but I have fiber-cement siding (commonly known as HardiPlank) and couldn't…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 547
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I'm running some Cat6 outside for a camera, but I have fiber-cement siding (commonly known as HardiPlank) and couldn't staple the network wire. I noticed the siding planks had small gaps where they overlap, and upon further inspection, they can be slightly pulled out.
The Cat6 I'm using is 6mm OD so I designed some clips that can slip under the siding and friction hold the network right under where the planks overlap.
I made three thicknesses to accommodate the variations in the siding, 1mm, 1.5mm, 2mm
Print Settings
Printer Brand:
Anycubic
Printer:
Photon Mono_x_6k
Rafts:
No
Supports:
No
Resolution:
50 um layers
Infill:
n/a
Filament: 25% Tenacious 75% Elegoo Standard Resin Black
Notes:
No reason why it shouldn't print OK via FDM. I only have PLA right now, which will break down quickly in the sun, so I used my resin printer.
Category: DIY