Hexagonal vase
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A vase I made when first testing my Mini+. Prints very easily. Don't use PLA when putting water in, it leaks.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 111
- Wydruki
- 3
- Wyświetlenia
- 401
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Hexagonal vase
Designed by R_vdk
- Design date 5/09/2021
- Printtime 8h 25min
- Weight 109 g
- Dimensions 115 x 100 x 120
Application / Functions
A vase I made when first testing the possibilities of my Mini+. Printed very well and fast. Used PLA as material, not knowing I would run into problems later. After a couple of weeks using it as a planter, the bottom started leaking water. One of two things was happening: either the seams weren’t perfectly watertight, or PLA itself is not watertight (Didn’t yet research it but I stopped using PLA for this purpose).
Features
It’s a thick-walled vase. It holds stuff.
Future improvements
None
Printer settings – Prusa Mini+
| Setting | Value |
| Filament | PETG (Do not use PLA) |
| Nozzle | 0.4mm |
| Layer thickness | 0.2mm |
| Temperature | First layer +10°C, rest at standard values |
| Sheet | Textured sheet |
| Speed settings | Factory settings |
| Infill | 5% |
| Brim | No |
| Supports | No |