CNC Kitchen TS100/101 heat set insert tip storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Store your heat set insert tips in the cardboard tube that comes with the kit.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 1169
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Edit 12.10.2023: There might be different size tubes out there. This one fits if your tube inner diameter is roughly 14 mm. Check comments and remixes for slimmer versions.
Ordered the TS100/101 soldering adapter and tips set by @CNCKitchen and thought what a nice cardboard tube the TS100/101 tip came in (I must be getting old). Since I already have a storage solution for the soldering iron adapter I decided to use the tube to store the heat set insert tips.
Not very convenient to grab the bits out of their slots, but since changing bits is not too frequent I'm sure it's ok.
Use fine or adaptive layer height to get the smoothest contours.
STEP file included.