Shorter Door Seal for P1S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified version of the X1C/P1P door seal by Jai gantic to better fit by P1S
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 310
- Wydruki
- 3
- Wyświetlenia
- 2707
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- GNU General Public License v2.0
I liked the door seal created by Jia gantic but it did not fit right on my P1S - it would bind in the hinge if the door was fully opened.
This remix cuts 0.8mm off the top of it and brought the legs closer together at the bottom for a tighter fit. It still fully seals on the edge but no longer binds for me…
I also uploaded a 1mm cut version BUT have not tested this version.
If this is still binding, you could try scaling the Z axis to 90 or 95%…
Equipment/settings:
- P1S
- Bambu slicer
- 0.4 nozzle
- Black PolyMaker PolyFlex 95a TPU
- Default generic TPU profile with retraction tweaks
- 2mm retraction
- 45mm/s retract
- 20mm/s deretraction
- 1mm distance threshold
- Printed in silent mode
- Bambu gold textured PEI plate with glue stick
Sorry for the bad photo - photographing these black filaments on a black printer is tricky…