Cable Channel / Duct with different corners
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A way to cover up cables on the wall, I designed it to cover the Atmos cables from my ceiling to the AV receiver
- Ocena
- 5 / 5
- Polubienia
- 304
- Pobrania
- 1552
- Wydruki
- 14
- Wyświetlenia
- 4989
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 2024-06-23
Added 3 new corners
Update 2024-01-02
Added T-junctions and an end piece
I designed the cable channel to cover the 4 Atmos cables running from my ceiling to the AV receiver.
The space for the cables inside is 20 x 10,5 mm.
The idea was to clip the long channels into the wall pieces on the end, so each wall piece is covered by 2 channels.
I also designed some corners, I think with flipping and mirroring in your slicer you can have all the corners you want, if you need something special, just write me a short message and I see what I can do ^^
Printing
I printed the channels with the flat side on the print bed, some of the corners need supports.
I could fit 5 channels on one Bambu printbed (see last pic)