1 / 3
Capitangolo Makercoin
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
This is my shot for a maker coin.
The fish is a Hake, which has been my logo for a long time. Nothing religious, it's from a bad joke that only translates in Spanish, sorry (ツ)/.
This should be fairly easy to print. No supports needed, just some infill.
I've also added the Fusion 360 file, so you can see step by step how I did it. Just learning F360, so any tips on how to improve are welcome ^_^.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
Photos are at 0.2mm, however, better resolution will give better results.
Infill:
10%
Category: 3D Printing Tests