Parametric Labels for Akro Mils AkroBins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OpenScad Model for labels that slot into label slots on Akro Mills Bins
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 692
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I have printed these with multiple colors in PLA by manually changing filament at the first layer of text.
I have tested 2 sizes: Little (for 30-210 and 30-220) and Big (for 30-230 and 30-235)
These will probably fit other bins as well.
I have found that different batches of Bins have the labels fit a little differently. Try my default settings and adjust to fit your bins.
OpenSCAD settings for Little:
Width=70.5;
Flange_Width=2.5;
Height=22.5;
Flange_Thickness=1;
Total_Thickness=2;
Letter_Height=1;
Letter_Size=12;
OpenSCAD settings for Big:
Width=95;
Flange_Width=2.5;
Height=41.5;
Flange_Thickness=1;
Total_Thickness=2;
Letter_Height=1;
Letter_Size=16;
The two OpenSCAD files are identical other than the default parameters.
To save time and filament, you can print without bottom layers (see images)
Recommended settings:
0.6 Nozzle
0.25mm layer height
PLA
0 bottom layers, 3 top layers