Walmart Cosco Stroller Handle Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stroller extension to prevent hunching over and/or kicking the stroller while walking.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 1108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
I made this stroller out of necessity. I am 6'2" and these tiny strollers had me either kicking the stroller or hunched over and hurting my back. The part fits over the existing stroller handle and snaps on to the metal. You will need 6x 1" cinch straps for which there are slots.
I designed this to be used with ASA-CF, 100% fill for strength. I used tree supports with the handle curving outward away from the bed diagonally placed on my K1 Max 300x300 bed.
If using ASA-CF, I had the best results (after much trial and error) extruding at 0.3mm with all fans and cooling turned off. 260C hot end and 100C bed.