V6 Silicone Sock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this mold because no one that i found was the way i like, almost all have small pins that will brake over time…
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 197
- Wydruki
- 2
- Wyświetlenia
- 1753
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this mold because no one that i found was the way i like, almost all have small pins that will brake over time or in the first time.
This is my first try creating a silicone mold, and it worked reasonably well. So, if you want to try make your own silicone socks for the v6 block, give this thing a go.
You will need some m3 screws and nuts and a syringe.
2x m3x16
2x m3x20
Print instructions
Works with any material you want to use, print at 0.2 mm layer height and 3 walls, no need for big infill 10% is good.