Coffee Stand / Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand for coffee makers such as Bialetti or similar.
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 216
- Wydruki
- 5
- Wyświetlenia
- 2458
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Stand for coffee makers such as Bialetti or similar.
This particular one has been designed to fit the basket of a WMF (german brand) electric coffee maker, but other brands might fit on top of it just as well.
The center has a small drip hole to get rid of any droplets or coffee grinds that might get trapped in the middle as the center is a bit hard to reach with a wipe.
Or you just give it a good blow :)
Print instructions
I have printed this on a Flashforge Creator Max with 0.18mm layer height with no supports or brim as the base is almost as wide as the whole model.
You might want to give a little bit more infill to make the base and columns a bit sturdier (e.g. 25%).