Watch Escapement Desk Toy (8-32)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of LarkysPrints "Watch Escapement Desk Toy" (https://www.thingiverse.com/thing:3364860) where the…
- Ocena
- 4,833 / 5
- Polubienia
- 150
- Pobrania
- 638
- Wydruki
- 19
- Wyświetlenia
- 5772
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of LarkysPrints "Watch Escapement Desk Toy" (https://www.thingiverse.com/thing:3364860) where the holes and hex cutouts have been enlarged to accept #8-32 US Machine Screws (approximately 4.2mm in diameter). This might make it easier for some to obtain the fasteners. Please refer to LarkysPrints summary page for pictures and details for adjusting the impact pin position and the pallet fork end stops.
A number of LarkysPrints original files will work with this design if a drill bit (or another method) is used to increase the hole size to fit the #8 outer diameter of nominally 0.164" (or 4.2mm").
The fasteners required for this design are:
2x #8-32 2-1/2"
2x #8-32 2"
1x #8-32 1-3/4"
1x #8-32 1-1/4"
3x #8-32 1"
12x #8-32 3/4"
1x #8-32 5/8"
2x #8-32 1.2"
4x #8-32 Steel nylon-insert locknut
23x #8-32 Hex nut
28x 1/8" (or #8) Washer
UNF (#8-36) fasteners could be used instead.
A video of this design is on youtube:
Print instructions
Printer Brand: Ultimaker
Printer: S5
Rafts: No
Supports: Yes
Layer Height: 0.2 mm
Infill: 20% and 100%
Filament: Ultimaker Tough PLA
Notes: