Mach1 BT55 Saberhawk payload and fin jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom payload and fig jig for the Mach 1 Saberhawk model rocket.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Additional and replacement parts for the Mach1 Rocketry BT55 Saberhawk fiberglass model rocket kit. The files include a BT55 3 fin jig specifically designed for the Saberhawkt and a payload bay designed for custom PCBs but can also hold a Jolly Logic Altimeter Three.
The fin jig could work for other BT55 body tubes, but check the height of the standoff relative to the fins and the spacing for the thickness of the fins. The payload bay is designed to slide into the shoulder of the nose cone. Epoxy the payload bay into the nose cone shoulder and then drill vent holes. The payload bay extends the shoulder of the nose cone. The tie-off point threads into the bottom of the payload bay. The Fusion 360 design files are included if you need to make changes and have many of the key values set as parameters.
The rocket model kit is at Mach 1 Rocketry
The Altimeter Three is at Jolly Logic
Visit MacModeler, my blog discussing a wide variety of eclectic models.
Print Settings
Printer brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
15%
Filament brand:
Keene Village Performance
Filament color:
Blue
Filament material:
PLA/PHA
Notes:
The resolution setting is not critical for the effectiveness of the design of the fin jig but is recommended for the nose cone.
Keene Village Performance PLA is available at: Keene Village Plastics
Originally posted on Thingiverse at Macmodeler on November 6, 2019.