1 / 3
Mach 1 BT50 Black Brant Payload Nose Cone and Fin Jig — zdjęcie 1
1 / 3

Mach 1 BT50 Black Brant Payload Nose Cone and Fin Jig

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Additional and replacement parts for the Mach1 Rocketry BT50 Black Brant fiberglass model rocket kit.

Ocena
0 / 5
Polubienia
0
Pobrania
22
Wydruki
0
Wyświetlenia
190
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

Additional and replacement parts for the Mach1 Rocketry BT50 Black Brant fiberglass model rocket kit. The files include a BT50 3 fin jig specifically designed for the Black Brant and a conic nose cone with a payload bay for the FireFly altimeter.

The fin jig could work for other BT50 body tubes, but check the height of the standoff relative to the fins and the spacing for the thickness of the fins. The payload bay is inside the bottom of the conic nosecone and is held in place by a threaded shoulder. The Fusion 360 design files are included if you need to make changes and have many of the key values set as parameters.

The rocket model kit is at Mach 1 Rocketry

The Firefly altimeter is at PerfectFlite Direct

Visit MacModeler, my blog discussing a wide variety of eclectic models.

Print Settings

Printer brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

No

Resolution:

0.1

Infill:

20%

Filament brand:

Keene Village Performance

Filament color:

Blue

Filament material:

PLA

Notes:

The resolution setting is not critical for the effectiveness of the fig jig design but is recommended for the nose cone.

Keene Village Performance PLA is available at: Keene Village Plastics

Originally uploaded to Thingiverse.com by Macmodeler on February 12, 2019.

Tagi