Display Case Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flat base for Michaels ring display case.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 1188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found this nice little 5.3 x 2.3 plastic case at my local Michaels and wanted to use it for small scale figures but I didn't have a clean way to remove the ring holders so I recreated the base. The tolerances are a bit tight so be careful taking the clear top from the holes.
Display Case here: https://www.michaels.com/product/53-3ring-championship-display-case-by-studio-decor-10625864?michaelsStore=9050&inv=1
I have included a few files for use.
Base.stl = The regular flat base
Base Riser.stl = Goes on top of the flat base to give a riser for figures
Base Riser with Plate = Same as riser but with a plate to put a logo or small picture
Base Riser.F3d = Original Fusion project in case you want to change things (I have some of the parts included for the Pikmin display I made from this)
If curious the Pikmin are from the Agatsuma line you can pick up from eBay.