1 / 2
Cable Passthru with TPU grommet and 2.1x5.5mm dc power inlet insert for honeycomb ams riser — zdjęcie 1
1 / 2

Cable Passthru with TPU grommet and 2.1x5.5mm dc power inlet insert for honeycomb ams riser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cable Passthru with TPU grommet and 2.1x5.5mm dc power inlet insert for honeycomb ams riser

Ocena
0 / 5
Polubienia
22
Pobrania
79
Wydruki
0
Wyświetlenia
1069
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

DC and USB A Cable Passthru with TPU grommet and 2.1x5.5mm dc power inlet insert for honeycomb ams riser v3, should be compatible with earlier revisions too.

Grommet files should be printed with TPU.
Both should be friction fit, I have tested with the connector I have but dimension may differ a bit on these Chinese components so let me know if there is a fitment problem. Take off the metal nut obviously. 

Tagi