Gtech Pro accessory tool latch clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Accessory tool clips for a Gtech Pro vaccuum cleaner.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
About this clip
If you own a Gtech Pro vaccuum cleaner then at some point you will need some of these clips because the original items break easily and do not seem to be available as spares.
Design details
Several iterations were made to get the dimensions exactly right and then the clip flew off overnight because the hinge pins bowed inward. Now I have added ribs along and across the clip for strength and put a chamfer behind each hinge pin to resist bending in.
Printing
Machine
Creality Ender 3 Pro
Material
PLA
Nozzle
0.4mm
Layer height
0.12mm
Infill
10% Zig-Zag
Other
The hinge pins need support but the pads are very small, so I added a 3 line Brim to help stick them to the printer bed.