Insulated Can holder! (or Coozy or Koozie or whatever you want to call it...)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on the on the insulated can holder.
- Ocena
- 4,5 / 5
- Polubienia
- 59
- Pobrania
- 312
- Wydruki
- 1
- Wyświetlenia
- 2260
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE: I finally realized why my handle wasn't right and updated the model. The v2 version should print better.
Here is my take on the insulated can holder. Insulated you say? Yes. Only you need to buy a can of spray polyurethane foam and fill it up. I've tested the setup and it works well, without using too much foam up. A regular sized can of foam would probably get you 8-10 holders (I'm guessing but I'm at 5 with plenty left). You print the body that comes premade with access to the interior to add the insulator. After you finish with the insulator and it is fully dry, sand it flat and adhere the base with your adhesive of choice.
I've modeled the 1mm wall thickness into the body, so you should slice it with 0% infill. The slicer might complain about some of the geometry but I printed 5 of these with no issue (maybe a little stringing on the interior that you can' t see). The lid I printed at 102% for a good fit for the threads. The base is pretty easy. I've also included a riser for those who don't want to buy king cans.
Finally after I'd completed all my development my wife asked for a regular sized one with a handle… so I've added a regular sized one with handle and it came out ok. I also added it to the king can size which also came out ok. I had to print them with a brim to keep the handle in place until it attaches and there was a bit a stringing right at the attachment point. But overall not too bad.
The only thing I didn't make was a regular size one with no handle. If there is any interest in that let me know. Hopefully everyone enjoys and let me know if there are any issues you run into and how it works.