1 / 2
Sparepart for Elta glass water kettle lid hinge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a sparepart which fixes the hinge of the lid of an Elta glass kettle
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Printing
Due to the exposure to hot temperatures in the kettle, I used ASA as a material.
I played with different orientations and found that the orientation in the .3mf file produces the most mechanical strength.
After I had first layer adhesion issues (even with a brim), I put everything onto a raft which solved it.
Assembly
- Remove and unscrew all the old/broken parts, the lid should be seperate now
- Screw the new part onto the kettle
- Remove the top cover of the lid by using e.g. a screwdriver as a lever
- Take the metal bar out of the hinge
- Position the lid onto the printed part, take care of the metal spring
- Lead the metal bar through the holes in the lid, the new printed part and the metal spring
- after this step, the hinge should work already
- clip the cover of the lid back on, be careful about the button in the middle
Notes
I will provide more pictures in the next days