1 / 2
Infinus stock extension
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An extension for the stock of the Nerf Infinus
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 308
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (15)Powiązane
This is an extension for the buttstock of the Nerf Infinus that adds 40mm in lenght.
To mount it you'll need a m4x30 bolt and a m4 nut.
To print it i recommend to put the back of the stock on the buildplate with supports and a raft with at least 5 layers, less if your printer doesn't have "elephant foot" problems. If your printer has really good bridging capabilities you can try with printing it with the front on the plate