Silly Walks Clock (yet another)

Yet another Silly Walks Clock (OK, there are not too many yet). Based on a Thingiverse Model from Colin Haynes (https://www.thingiverse.com/thing:4644228) but amended in some significant ways:

• anatomical corrected legs, now they are the same length butt-to-knee and knee-to-heel;
• Adjusted feet angles to make them look, well, nicer;
• the hat is now a Bowler hat, as should be;
• model made to fit the TFA 60.3061.01 movement (56x56x16mm);
• added a Second Hand in form of an umbrella (no obligation to use).

I modeled everything fairly large (head-to-toe at half hour approx. 30cm) - that of course puts some stress on the clock movement so the legs are modeled extra lightweight, just two layers thick but with a 8 layer frame and a central strut - even so it takes a clock movement with some torque to prevent the minute hand (sorry - leg) to get stuck at the 45 min marker.

A smaller version (75%) is included, as is a collection of all relevant step files - you might need these to adjust the holes according to your printer's accuracy. My Ender 3v2 is reliable to 0,2mm, so these are “my” tolerances, you might want to do some test prints especially for the leg and brolly mounting holes to make sure they keep where they should on the movement shafts you use. 

The model is intended as a wall sculpture, therefore no clock face is included, nor did I waste any time to think up hour or minute indicators - if you really need a clock you will have to model your own, sorry. 
It looks best when you chose a filament color for the case matching the color of the wall you're hanging it to.

Enjoy!

Update: Slightly changed the case to incorporate an alternative hanger. When going with the 75% model you might find that the hanger loop interferes with the desired appearance. Just use a small nail and snip off the hanger loop and stem. Slightly amended the body/case connector and updated the bodies files accordingly. .step unchanged for unlimited tinkering.