1 / 3
Planetary gearbox winch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Winch with a planetary gearbox about 2 to 1 gear ratio
- Ocena
- 0 / 5
- Polubienia
- 61
- Pobrania
- 194
- Wydruki
- 0
- Wyświetlenia
- 1380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (79)Powiązane
I recomend printing in PLA on PETG no suports needed. You might need some superglue for the dovetail on top and wire for the handel I printed it in 50% scale and the tolerances were too tigth so I'd print it in full size. You need one of each part except the plnet gear witch you need three of.