1 / 5
Ender 3 Part cooling fan duct for 3010 fans — zdjęcie 1
1 / 5

Ender 3 Part cooling fan duct for 3010 fans

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

a part cooling fan duct assembly for the ender3, uses two 30x30x10mm fans, compatible with direct drive mods

Ocena
0 / 5
Polubienia
2
Pobrania
49
Wydruki
0
Wyświetlenia
605
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

         this is another part cooling upgrade for the ender3, probably not the best, probably not

         the worst either.

         its a bit bendy when bumped but that's just impact dissipation (its a feature)

 

UPDATE V2:

  • edited the ducts so they actually blow air on the extruded plastic lol
  • oriented the ducts correctly so you dont have to :)

Supplies:

  • 12 M3x16 screws (or just 6 if you use two per fan)
  • 4 M3x4 screws
  • 16 M3 nuts (or 10 if you use two per fan)
  • two 3010 fans
  • one 4010 fan (stock on ender3)
  • (recommended): some super glue for easier assembly

Assembly:

  1. Bolt the 3010 fans to the ducts, gluing the bolts in place before screwing the fans
  2. Bolt the 4010 fan to the center part
  3. Bolt the ducts to the center part
  4. Bolt the whole assembly to the printer

Tagi