1 / 3
Card Holder for Kids (and Adults as well) — zdjęcie 1
1 / 3

Card Holder for Kids (and Adults as well)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My daughter is 5 and holding a lot of cards during card games still a challenge - she needed a card holder!

Ocena
0 / 5
Polubienia
13
Pobrania
33
Wydruki
0
Wyświetlenia
450
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

My daughter complained for a while that I hadn't made her the card holder I promised to make, yet.

I needed to act. 

Have designed a model during a live stream https://youtube.com/live/HhHaBDM7lYA and summarized the final outcome in a short:

the felt material needs to be 4mm and 4.5mm thick.. thicker is less problematic than thinner as for thicker ones only the screw must fit… for thinner ones the rails touch and one cannot stick the cards in between anymore.

The screw I used was an M3 with 1cm thread length.

Tagi