Mini Mechanical Capstan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount and cinch those cords tight! Snaps together, no supports. Gravity operated.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 74
- Wydruki
- 1
- Wyświetlenia
- 960
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Public Domain
This is for the Ropes, Cordage & Straps Gear flash contest. This design is a snap-together, fully operational, gravity operated, miniature mechanical capstan. It makes it possible to cinch (through ratcheting action) cords extremely tight, but more than that, it's just fun to play with.
I definitely recommend less infill on the base. In the demo video I actually ended up snapping the internal infill supports by creating too much tension. This was with 15% infill. The base specifically would probably be better off with 20% plus.
It's not necessary, but I also recommend using a 13/64ths drill bit to ream out the bore holes in the little gravity flappers. I definitely recommend watching the video to see how to assemble.