Tactical Paracord Dispenser/Rewinder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tactical Paracord Dispenser/Rewinder Also works with cables.
- Ocena
- 0 / 5
- Polubienia
- 257
- Pobrania
- 549
- Wydruki
- 1
- Wyświetlenia
- 3916
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Tactical Paracord Dispenser/Rewinder.
NOW YOU CAN GO BACK IF YOU PULL TOO MUCH.
Assembly on gif image.
You'll need:
9x M4x30 DIN912 screws
1x M4x20 (or 18mm)
1x M4x5 (optional if you want to have something on end of crank - I did)
You'll need to split spool, crank base and case “per object” in slicer. Orient things (especially the crank) so it has most structural strength (thats why its split at first place, so you can align layers with holes that are most stressed)
You'll need to embed Square m4 nuts into bottom part of case and bottom part of spool print, remember that! Otherwise whole thing quickly became loose if you only secure it fith screws.
I plan version with ratched and/or knife to cut dispensed rope/cable in near future.
PRUSA SLICER FILE IS JUST TO SHOW YOU ORIENTATION OF FILES, DO NOT PRINT IT AS-IS