Prusa MK4 Ubiquiti G4 Instant Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remixed model for mounting the Ubiquiti G4 Instant camera to a Prusa MK4.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 1176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A remix of NiclasS's remix of Rokkdaddy's camera mount, does the job of mounting a G4 Instant camera to the MK4.
I used NiclasS's base and offset the camera mount further back due to how far the G4 Instant sticks out, and added a camera mount to connect the stock G4 Instant baseplate to the mounting arm. When installed gives good view of the printing plate and clears no problem. Nut pockets sized for #8 nuts. It's a bit hacky but it works…
For wiring I installed a simple 24V > 5V USB (type A) buck converter, and then a USB Type A to C adapter, and connected the stock Ubiquti Type C USB power cable to the camera. The camera is powered at all times when the 3D printer is on.
Parts List:
- #8 Machine screws and nuts
- 24V to 5V (USB) Buck Converter
- USB A to C Adapter