1 / 7
private sign do not read, now in 3 colors and 2 designs
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed one in 3 colors so here we go. 2 design options for your convenience. Use prusa slicer color change at layer.…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 53
- Wydruki
- 3
- Wyświetlenia
- 228
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (19)Powiązane
I needed one in 3 colors so here we go. 2 design options for your convenience.
Use prusa slicer color change at layer. Use that twice.
-Set 1st layer at 0.32 mm, regular layer height at 0.2 mm.
-Change colors once at 1.52 mm and another time at 1.92 mm.
Category: Signs & Logos