Pallet Rack 1:10
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the initial design for my MINI WAREHOUSE that more closely approximated the actual pallet racks at work.
- Ocena
- 0 / 5
- Polubienia
- 297
- Pobrania
- 1069
- Wydruki
- 0
- Wyświetlenia
- 5722
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A pallet rack for storage, scale 1:10.
This is the initial design that more closely approximated the actual pallet racks at work. Because this design was a bit more difficult to print and required gluing of the different parts, I changed course and the new design was created. Because I was encouraged by my family members to share this one as well, simply because it looks even better visually, I hereby did..
The new design is published here: Mini Warehouse
I printed everything with 0.4 nozzle, 0.2 layer height, no support and 15% infill (there is vitualy no infill at all with the Upright Beams and Feet).
After printing, the different parts must be glued together for firmness and require a little eye for detail. I used superglue for this. The Holding Beams have small tabs that fit into recesses on the inside of the Upright Beams. This way you can position it easily.
You can use all the add-ons that are published with the Mini Warehouse!
Please note that this design is larger, ideal is a print bed of 300 in length or width, but rotated 45° a print bed of 220x220 is also workable. Note that I not intent to update this model!