1 / 4
Magnetic tape dispenser w Edding 140 S mount — zdjęcie 1
1 / 4

Magnetic tape dispenser w Edding 140 S mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Redesign of @dp_makes's model.

Ocena
4 / 5
Polubienia
23
Pobrania
79
Wydruki
1
Wyświetlenia
558
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

Inspired by @dp_makes's model. I have remodeled it and changed a few things:

  • added two 6x6 mm cylindrical neodym magnets for holding the tape mount on metal surfaces e.g. frdiges
  • added a slight brim on the bottom to prevent the tape roll sliding down
  • adjusted the pen holder diameter to support Edding 140S permanent pen

The uploaded STL model is compatible with 30 mm wide tapes (77 mm inner diameter) and Edding 140 S permanent marker pen.

Also as always, I have uploaded the parametric Fusion 360 design so you can easily alter it to your needs.

 

Tagi