1 / 1
Small Foot for DIY Mechanical Keyboard build, Reviung 34
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I recently built a Reviung 34 mechanical keyboard and needed some small feet for the base of the device.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Little foot for my Reviung 34 keyboard build. Print 2 in tpu at around 30% infill and use some double sided tape to stick them to the base of the keyboard. Works well, nice angle and stops erroneous movements.