Bic pen, Capped
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a fancy upgrade to your Bic pen. Capped, but no clip.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 632
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with a 0.4mm nozzle max. Adaptive layer height down to 0.1mm because there's fine detail.
Print both parts with the flat face down and use a brim. No support should be necessary.
Print them one at a time for the best result to reduce stringing. You will need to deburr/chamfer the bottom edge with a sharp knife or sandpaper just to ensure a proper fit and removal of the brim.
Holds a BIC Round Stic. I prefer to fill mine with the larger 1.2mm ballpoint for extra-smooth performance.
The included cover photo shows versions modified with a name and a clip. The models provided here are just the plane pen with no modifications.