AnkerMake - M5C - USB-C Wire Protection Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi all! I made up this cap that goes over the left z-rod tower to help discourage the USB-C cable from flexing…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 862
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Hi all! I made up this cap that goes over the left z-rod tower to help discourage the USB-C cable from flexing backwards and snagging on the upright.
I had a few instances on taller prints where the cord snagged and caused an X-layer shift. This was just a quick solution to preventing that. Enjoy!
Edit: there are a few options here - I have a V1 and then a few variations of a V2 - 10mm, 15mm, and 20mm high options. I personally like the way the 20mm works. but your choice.
Print Settings
Printer Brand:
AnkerMake
Printer:
AnkerMake M5
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
10
Filament: Doesn't Matter - I used Creality Ender Filament PLA White
Notes:
Recommend using a brim, autobrim, or a raft. Organic supports required.
Category: 3D Printer Parts