Runcam Thumb Pro 4K ND Filter Container (+6 Slots for Micro SD Cards)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Container for 4 Runcam Thumb Pro 4K ND Filters + 6 Micro SD Cards with a thread lid.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've created a little container to carry up to 4 ND Filters from the Runcam Thumb Pro 4K (new Wide edition). Additionally there are 6 slots for MicroSD Cards.
The lid is thread based with about 0.3-0.4mm tolerance so it should work with most printers. It takes about 2x 360° turns to open it.
The text on the top of the photo is not part of the model. I preferred to keep it clean for others - if you want to add some yourself it's can easily be done in the Prusa Slicer with just 2-3 clicks.
I've printed mine with about 40% infill and no support which results in a total weight of about 41g.
