1 / 4
Covers & Angles for 12mm x 9mm Self Adhesive Trunking
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Covers & Angles for 12mm x 9mm Self Adhesive Trunking
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 341
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
A collection of angle corners and caps for 12mm x 9mm self adhesive trunking.
They are designed to clip over the trunking and allow the self adhesive strip on the back to show through the covers.
I made these as I could not find any off the shelf for this size trunking.
It's not a full collection of all possible angles, and only covers 90 degree angles, more could be added if required.
Obviously, these should be printed in white to match the trunking, but I already had black loaded into the printer which is good enough for prototypes.