Prusa XL series: Debris bucket (Update: Compatible with new Dock Variation B)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I notice that all the Debris that falls of the nozzle lands behind the XL and also on the Power supply and Buddy Box
- Ocena
- 4,914 / 5
- Polubienia
- 312
- Pobrania
- 1344
- Wydruki
- 78
- Wyświetlenia
- 6927
- Oceny
- 70
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I notice that all the Debris that falls of the nozzle lands behind the XL and also on the Power supply and Buddy Box. Ive tried to find a good way to catch all the Debris of the nozzle, that come off when the nozzle parks.
Ive tried to design as a one piece bucket, but when there is Debris in the bucket, since you would need to tilt the bucket it could fall out.
I also made a multicolor version.
Change 22.09.2023: The First extruder needs a special bucket, there is a ground wire in the way.
Update 12.12.2023: Now compatible with newer Prusa XL Versions. Prusa changed the Tool dock to Variation B.
After many asked me how they could support me, you can now
Tip me on KO-FI by klicking here:
https://ko-fi.com/surfalex2000
Check out my other optimized XL Parts! There is a Series to come!
You can find them in my Collection:
https://www.printables.com/@Surfalex2000/collections/830114