Simson S51 blinker / turn light with FreeCAD file
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simson S51 blinker / turn light with FreeCAD file
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 827
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this turn light holder in hope it won't break when the motorcycle gets sleepy and lays down. At least I end up with only one component broken.
Only time will tell (was not yet field tested).
This model will replace the bulb housing without the lid.
You can reuse from the original turn light the bulb holder metal thingy, nuts and bolts and the transparent/yellow lid.
I printed it with
- PETG
- 0.2 layer height
- 0.6 nozzle
- 5 perimeters (for the big bulb holder I use only 3 perimeters)
For the middle part you have to cut the two 0.2 mm bridge for the teeth on the bottom (I made it for not getting loose from the print bed).
For the UpperBody and BottomBody part (the part fastening the assembly to the rod) I use small piece of rubber from old wheel tube each.
You may need Realthunder's FreeCAD version to open the cad files.