1 / 3
1997 Volvo Washer Fluid Cap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This fits a 1997 Volvo S90 (2.9L with VIN Code 96) windshield washer fluid reservoir cap.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
This is a quick little design I made to replace a broken windshield washer fluid reservoir cap. It may fit other models but it's specifically for the 1997 S90. It has a tether that needs to be inserted in the body frame hole like the OEM version.
Print Settings:
- Material: TPU
- Temp: ~= 205ºC - 215ºC, bed: 67ºC
- Speed: 40-50mm/s
- Printed on an Artillery Sidewinder X2
- Supports: No - none needed
This is a multi model print. There are some good tutorials on YouTube on how to do this. Here is a quick overview:
- Load the Washer Symbol model into your slicer. I recommend setting it off center to allow the centering probe to work normally if you have one.
- Disable the use of brim/skirts/raft.
- Slice the model and save the GCODE file.
- Load the Washer Lid model into the slicer.
- Place the model so that the cutouts for the washer symbol line up exactly over the top of the previous model. Once that is complete, delete the washer symbol model.
- You can use a skirt if needed on this model, but I wouldn't recommend a brim as this may impact the first model.
- Slice the model and save the GCODE.
- Print the Symbol model first, and ensure that the printer does not have a chance to cool down and dislodge the print.
- Swap your filament to a different color and print the Lid model. It will trace around the first print if it's properly aligned and continue to print until they become joined as a single print.