Spring Loaded Strap Roller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strap roller to be able to neatly store my slap straps in my car. Uses pen springs and is satisfyingly clicky
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 525
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3 piece strap roller is the ultimate tool for those seeking efficiency, organization, and a touch of satisfying auditory delight. Utilizing standard pen springs which when engaged, emit a gratifying series of clicks that audibly signify the progress of your winding efforts. This auditory feedback serves not only as a confirmation of successful organization but also adds a touch of whimsy to an otherwise mundane task.
I printed this at a layer height of 0.35 with 20% infill and supports everywhere. Once printed you will need to insert the pen springs into the corresponding holes between the body and the spindle. There is a slot in the center of the wheel for you to slide your strap through and double back on itself for maximum hold or if you decide to use this for cordage or twine you can tie off the end to it.