Angel Wings for Macomber Ad-A-Harness loom
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For weavers that have a Macomber loom, here are some angel wings to help you warp your machines.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 647
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This angel wing is designed to work with your lease sticks when tying on your warp for a Macomber Ad-A-Harness loom. It should fit on the front or back beam so you can warp based on your preferences. Your lease sticks should only be about 3/4th inches wide to work with this model.
I have made this model 18mm thick, but I had success at a 10mm thickness. If you feel it will take too long to print two at 18mm thick, you can scale this one dimension to be thinner. I was having issues with my printer at the time and the tests still worked great on the loom.
- Rotate the object to lay flat before printing.
- You should not need a brim or supports to print.