Cable Tie (Zip Tie) Holder/Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for Cable Ties to organize them vertically. Designed to print in Vase Mode.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 650
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to organize my storage shelf, so I created this simple Cable/Zip Tie holder.
It is designed to be printed in Vase Mode for a quick print with little material (why waste hundreds of grams of precious PLA, just to hold a few zip ties, right?).
It probably won't stand up to a lot of abuse though, so keep that in mind.
I printed mine using a 0.4mm nozzle, with an extrusion width of 0.6mm, just to give it a bit more weight and thicker walls.
I've added three designs, one with a larger, square base, one with a “cloud” base and one without any base at all.
I suggest printing it with one of the bases to ensure the “towers” are somewhat well connected, and to give it a bit more bottom weight, making it less likely to tip over.
The towers' dimensions are as follows (H = Height):
- Ø60 mm, H225 mm
- Ø55 mm, H175 mm
- Ø45 mm, H150 mm
- Ø40 mm, H75 mm
Enjoy :-)
Created with parts in Prusa Slicer.
Let me know, if you need different dimensions.