1 / 8
Opel Vectra Station 2008 - Universal phone car kit — zdjęcie 1
1 / 8

Opel Vectra Station 2008 - Universal phone car kit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

V1: I needed a car kit for my iPhone Xs Max with case to be fitted in my Opel Vecra Station on the middle air vents.

Ocena
0 / 5
Polubienia
5
Pobrania
58
Wydruki
0
Wyświetlenia
895
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

V1: I needed a car kit for my iPhone Xs Max with case to be fitted in my Opel Vecra Station on the middle air vents. So I created this one which can be snapped onto the air vents.
(Opel_Vectra_Carkit_iPhone_Xs_Max_v2.stl file)

Best to be printed standing up just like the model is shown with supports and in ABS (you can try PLA but when car gets realy hot the material will warp)

V2: I designed a completely new mount inpired by the "modular mounting system" by https://www.thingiverse.com/thing:2194278

I have added two phone mounting clips for the modular mounting system so basically every phone can be mounted now!
(OpelVectraMountxxxxx.stl files)

Print out everything 1 time except for the knob hook and spacer:
6 x KnobM5
4 x Hook
4 x SpacerM5

You will be needing the following for the new design:
5 x M5 (30mm) screw
1 x M5 (60mm) screw
6 x M5 nut

And as before as this is mounted in a car, printing with ABS is advised!

Print instructions

Category: Mobile Phone Summary

V1: I needed a car kit for my iPhone Xs Max with case to be fitted in my Opel Vecra Station on the middle air vents. So I created this one which can be snapped onto the air vents.
(Opel_Vectra_Carkit_iPhone_Xs_Max_v2.stl file)

Best to be printed standing up just like the model is shown with supports and in ABS (you can try PLA but when car gets realy hot the material will warp)

V2: I designed a completely new mount inpired by the "modular mounting system" by https://www.thingiverse.com/thing:2194278

I have added two phone mounting clips for the modular mounting system so basically every phone can be mounted now!
(OpelVectraMountxxxxx.stl files)

Print out everything 1 time except for the knob hook and spacer:
6 x KnobM5
4 x Hook
4 x SpacerM5

You will be needing the following for the new design:
5 x M5 (30mm) screw
1 x M5 (60mm) screw
6 x M5 nut

And as before as this is mounted in a car, printing with ABS is advised!

Tagi