CPAP Blower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customized blower/dryer for CPAP tubing.
- Ocena
- 4,333 / 5
- Polubienia
- 67
- Pobrania
- 170
- Wydruki
- 3
- Wyświetlenia
- 3192
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I came across a model made by Matt Andreko and I really liked the size and look of it. Unfortunately it didn't have a lid and in my attempts to learn fusion 360 and make one I decided it was best to start from the ground up. This allowed me to add some customizations of my own, such as a switch and relocated power connector.
I used traditional fan screws that most computers used to use for all the screws on the model. The switch and power connector I had lying around.
For the blower fan I used this Sunon 5015 blower fan from Digikey:
https://www.digikey.ca/en/products/detail/sunon-fans/MF50151VX-B00U-A99/7691033