Basic Cable Clamp for Vinyl-Coated Cabling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic cable clamp for looping vinyl coated galvanized cable that uses a #10-32 hex nut and thumbscrew.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I created this clamp to hold looped cable together for stabilizing a telescope base, and alternatively as a wall/rafter anchored cable to prevent a TV from tipping off a dresser.
A #10-32 thumbscrew or alternative screw threads through the hex nut and pinches the two lengths of the coated cable together, preventing slippage.
An example of the cable I was using - https://www.homedepot.com/p/Everbilt-1-16-in-x-50-ft-Galvanized-Vinyl-Coated-Steel-Wire-Rope-811062/300019543
The slot has a slightly loose fit, but I included the model file to so that the cable channel/slot can be modified.
Printed with 0.6 mm nozzle in PETG at 25% infill; but a 0.4 mm will also work.