Traxxas Slash Revo Summit 1/16 Gyro mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gyro mount for the Traxxas Slash, Revo, Summit 1/16 (mini). This mount gives you a flat surface to mount a gyro on…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Gyro mount for the Traxxas Slash, Revo, Summit 1/16 (mini).
This mount gives you a flat surface to mount a gyro on your Traxxas 1/16 Rc car.
It will only work if you use one servo, as it utilizes the spare servo mount.
You can mirror it in your slicer software, depending on which servo you have installed.
The mount is screwed in one side, and rests on the servo on the other size. (note: may not work with all servos if they are taller than the one I use, but should work with most servos as they are often a similar size)
Print Settings
Printer:
Wanhao 5s (modified)
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20+
Filament:
SUNLU PLA - Carbon FiberBlack
Notes:
Print upside down, With the large flat side down on print bed.
Category: R/C Vehicles